Flexiteek Care and Maintenance
Care should follow the current instructions for the exact Flexiteek product, stain, and installation. This page provides general planning guidance and does not replace manufacturer documentation.
Key takeaways
- Rinse loose debris before scrubbing.
- Use only approved cleaners, tools, concentrations, and dwell times.
- Test unfamiliar products in an inconspicuous area.
- Check surface temperature and wet conditions before use.
Routine cleaning approach
Start with the least aggressive approved method that addresses the soil or stain.
- Remove loose grit and debris
- Rinse with fresh water where appropriate
- Use an approved cleaner and suitable soft tool
- Work with the plank direction and avoid damaging edges or seams
- Rinse residue and allow the area to dry
- Inspect seams, edges, transitions, and high-traffic areas
Why stain-specific guidance matters
Sunscreen, food, fuel, fish residue, mildew, rust, adhesive, and other marks may require different approved methods.
Do not promise that one cleaner removes every stain. Preserve product and warranty eligibility by following current manufacturer documentation.
Sun and barefoot use
Deck temperature depends on color, weather, airflow, moisture, time of day, and direct sun exposure.
Check the surface before barefoot use and use shade or cooling measures appropriate to the boat and manufacturer guidance.
Current manufacturer instructions
Review the current official care guide before using a cleaner, pressure washer, abrasive pad, or sanding method.
See Flexiteek’s current deck-care guidance. Product documentation can change, so confirm the applicable instructions for your deck and warranty before beginning.